This filter prevents dust and other large particles in the air from entering the unit. Before you operate
Using Instructions
Air enters into your AirSep FreeStyle Oxygen Concentrator through an air intake filter located under the cover on the lower front of the oxygen concentrator. This filter prevents dust and other large particles in the air from entering the unit.
Before you operateFreeStyle, make sure this filter is clean and positioned correctly.
At least one time each week, remove the cover on the lower front of the unit, and wash the air intake filter, which is positioned on the inside of the cover. Your Equipment Provider may advise you to clean it more often, depending upon your operating conditions.
Follow these steps to properly clean the air intake filter:
1. Remove the filter from the air intake filter cover, and wash it in a warm solution of soap and water.
2. Rinse the filter thoroughly, and remove excess water with a soft, adsorbent towel. Ensure that the filter is dry before replacing it.
3.Replace the dry filter.